Download CGMiner v4.1.11 (open source Bitcoin Miner for ...

I have a beagleboard that came as part of a bitcoin mining appliance and I broke linux. Offering a reward for the solution.

THIS PROBLEM HAS BEEN SOLVED.
I received a brand new KnC Saturn bitcoin miner TODAY. I promptly logged into ssh to configure the miner and made a mistake that has caused the appliance not to boot.
I am willing to offer $200 in reward, by paypal or bitcoin to the person or persons who helps me get this miner working. If it starts working, I will award the entire sum to those who helped in a sum divisible at my discretion.
This is the KncMiner Saturn, the miner I received today.
Here is a picture of the the controller board
This is the front of the beaglebone attched to the controller
Here is a picture of the back of the beaglebone
I have no experience with beagle boards, though I am comfortable with Raspberry Pi's, and pretty comfortable with linux (though I'm questioning that considering my current predicament).
Here's a synopsis:
The beagleboard runs a custom linux firmware developed by KnCminer with a bitcoin mining program called cgminer. The interface is accessible primarily from a web interface, secondarily by ssh.
I am nearly certain that the only problem is that I removed a file that the board is searching for on boot. There is a directory called /config/ that directory contains mining configuration files.
I issued
mv /config/cgminer.conf.factory /config/cgminer.conf 
which effectively deleted /config/cgminer.conf.factory. This has rendered they system only partially bootable. The system lights up and it responds to ping, but I cannot access the system by ssh or by the web interface.
I believe that all I need to do is to get into the beaglebone and cp the cgminer.conf file back to cgminer.conf.factory in order to enable regular boot.
In addition, I may have exacerbated the problem by attempting a hardware reset described on page 5 of this manual.
The company, KncMiner, does offer a support page with clean firmwares, but I don't know how to apply any of these to a non-working system.
I am more than willing to answer any questions. As I stated, I will award $200 in bitcoin or paypal to the person or persons who helps me get this miner working. The payout will only occur if this thread results in a solution. I will award the entire prize at my discretion to those who help at a ratio of my determination.
UPDATE 6:30am 10/22/2013: I glad to see bonez656 post that this is happening to someone else. I am currently trying to acquire a complete dd image of the saturn/jupiter so I can reflash my beaglebone. If this works, I plan to offer 1/2 of the reward to bonez656 and the other half to whoever provides the dd image.
UPDATE 7am 10/22/2013: I received support from Emilia at KnC that may make a flash unncessary. The miner has an Emergency State that may allow me to access SSH and restore the bad file. I will attempt this first and follow up around 5pm EST with details.
UPDATE 4pm 10/23/2013: The miner is up and running! I'll be providing 0.25 BTC to bonez656 for providing comments that got me closest to the solution.
The solution actually came from KnC miner support:
  1. Shut down the power;
  2. Disconnect 12V power cables from all the ASIC boards;
  3. Turn the power on.
  4. The miner will start, and red LED will light up eventually - it is in errored state "No ASIC board found"
  5. SSH into the miner, restore factory configuration files (sample network.conf.factory and cgminer.conf.factory attached)
  6. sync (issue sync command in the command line interface)
  7. Turn the power off.
  8. Plug in back all the 12V cables to the ASIC boards.
  9. Turn the power on.
  10. Happy mining!
submitted by knc_shipping_problem to BeagleBone [link] [comments]

CryptoSlax 0.3b (slax based linux miner)

build 0.3-beta update 0.3 final is ready, download at http://www.cryptoslax.web.id
this is updated version of SLAX miner, old post is here
CryptoSLAX 0.3b, download 316 MB
screenshot
bitcointalk thread
Donation : 1GE4dwPifw57JWz9izyXjiMCTe63PmXgth
Features :
How To Install :
Changes :
warning : this distro is not secure, there are no firewall, and most service are open for root access without password note: this is beta version, please report any kind of bugs or feature request
submitted by uraymeiviar to BitcoinMining [link] [comments]

Help with getting things to start mining scrypt currencies (using raspberry pi 2 , gridseed asic miner , & cgminer) . . .

Here's what I have & will be using (I already have the cables & power) :
raspberry pi 2 Gridseed ASIC Miner for Litecoin and Bitcoin Mining --- 4 of these cgminer
[ I followed this example for setting things up : https://www.reddit.com/defcoin/comments/23nvs1/raspberry_pi_asic_defcoin_mining_guide/ it is my understanding that any altcoin you wish to setup mining for , is done in this similar fashion ]
I want to do scrypt cryptocurrency mining , I just want to understand how this is done ....
( I know there's a lot of tutorials out there & great vids , and I've done a lot of reading on all this matter , but I can't seem to get things working right , please help / advise )
Questions:
  1. if I solo mine , what is the correct port # to use here (and is the below command formatted correctly more-or-less) :
sudo ./cgminer -o stratum+tcp:localhost:#### -u Username.Workername -p yourworkerpassword --gridseed-options freq=850
( I understand I need to create my own pool , a pool of 1 , is considered to be solo-mining , correct ? How do I do this ? )
  1. also , before I can solo-mine , I need to have downloaded & install the wallet for the cryptocurrency I am going to mine , correct ? And I understand there is some kind of Config files relevant that I should modify accordingly to set things up with my mining solo , right ? How is it done & where do I find this config files ??
  2. I tried connecting my 4 gridseed(s) to my raspberry pi 2 , via the 4 usb ports it has , but it seems like it can't handle the 4 of them , so I have to deal with only using 2 of the gridseed(s) connected to my raspberry pi 2 at a time .... does this seem right to you ? And so , what work around do I have for this poroblem , I want to use all 4 of these gridseeds connected to my raspberry pi 2 ,,, I'm guess a usb hub is needed for this right ?
THANKS IN ADVANCE FOR YOUR HELP AND GUIDANCE !!!
submitted by justahotmininggirl to scryptmining [link] [comments]

CryptoSlax 0.3b (slax based linux miner)

build 0.3-beta update
this is updated version of SLAX miner, old post is here
CryptoSLAX 0.3b, download 316 MB
screenshot
bitcointalk thread
Official site
Donation : 1GE4dwPifw57JWz9izyXjiMCTe63PmXgth
Features :
How To Install :
Changes :
warning : this distro is not secure, there are no firewall, and most service are open for root access without password note: this is beta version, please report any kind of bugs or feature request
submitted by uraymeiviar to gpumining [link] [comments]

SLAX based Linux miner (w/ support cpu/gpu Vertcoin mining)

CryptoSLAX 0.3b, download 316 MB
screenshot
bitcointalk thread
official site
Donation : 1GE4dwPifw57JWz9izyXjiMCTe63PmXgth
Features :
How To Install :
Changes :
warning : this distro is not secure, there are no firewall, and most service are open for root access without password note: this is beta version, please report any kind of bugs or feature request
submitted by uraymeiviar to VertcoinMining [link] [comments]

BFGMiner on Windows Setup Guide for Bitcoin Users + ASIC ... How to configure cgminer - Windows mining tutorial - YouTube CGMiner Solo Mining Bitcoin With A GekkoScience 2PAC ... How to setup cgminer bat file - Windows 10 mining ... How to run cgiminer bat file

2Pac USB Stick Miners can calculate Hashes for SHA256D based Coins using a custom CGMiner branch which is available for download as a pre-compiled version for Windows 7 or higher: 26/05/2019 @ 9e51f0b – cgminer-4.11.1-windows-gekko-9e51f0b.7z; When plugged in, the Miner is registered in Windows Device Manager as “2Pac BM1384 Bitcoin Miner”. For Windows 7 and Windows 10 operating systems ... CGMiner — The most popular miner for GPU / FPGA / ASIC, CGminer is an open source GPU miner written in C and available on several platforms such as Windows, Linux and OS X. One of the things that make it extremely popular is the fact that it is based on the original Cpu Miner code. CGMiner It includes overclocking, monitoring, fan speed control and remote interface features. Any configuration file may also contain one “include”: “filename” to recursively include another configuration file. A configuration record will save all the settings from all the files in the output. Features and Commands: CGMiner on Windows Setup Guide for Bitcoin Users + ASIC Miner Setup. Very low overhead free c code for Linux and windows with very low nonmining CPU mining and ram ... How to configure CGMiner with Butterfly labs Bitcoin Miner. OAC Technology asked on 2017-09-01. Linux; Databases; Miscellaneous; Hardware; bitcoin; 9 Comments. 1 Solution. 2,254 Views. Last Modified: 2017-09-08. I have looked through several guides and instructions but can't seem to find an easy to use guide or explanation of how to use and configure mining with CGMiner. The dependencies ... Get started today. You can get a helping hand with your designs in minutes. Head over to the directory, find the Assistants you need, and add them to your documents in a single click.

[index] [29762] [50250] [24008] [39704] [31538] [6372] [22579] [1035] [28276] [30705]

BFGMiner on Windows Setup Guide for Bitcoin Users + ASIC ...

How To Use ASIC Config App that helps easily to set-up the .bat files easily set-up the .bat files for cgminer and starts cgminer. App is made for windows and miners bought from Zeus and GAW. [EASY] How To Mine Bitcoin Using ASIC USB Block Erupters and BitMinter - Duration: 3:56. Daniel St.Pierre 9,104 views BFGMiner on Mac Setup Guide ----- BFGMiner website: http://www.bfgminer.org Install ASICMiner driver: http://www.si... In this video I show you how to start mining Bitcoins with CGMiner and an account at your favorite miningpool. Get CGMiner at: https://bitcointalk.org/index.... Red Fury ASIC BitCoin Miner Setup With BFGMiner - Duration: 2:59. TingaWinga5 18,376 views. 2:59. How to setup Gridseed 5 chip Scrypt Asic Miner using cpuminer - Duration: 13:55. ...

#